CalcHoursWhy 35 minutes is 0.58
Decimal hours express minutes as a fraction of 60, because an hour has 60 minutes: 35 ÷ 60 = 0.5833, which payroll rounds to 0.58. Thirty-five minutes is seven twelfths of an hour, 0.5833, which payroll shows as 0.58. On a clock that rounds to the quarter hour it becomes 30 minutes, because 35 is five minutes past the half and ten short of the three-quarter mark.
Hours and 35 minutes in decimal
| Time | Hours and minutes | Decimal hours |
|---|---|---|
| 1:35 | 1 h 35 min | 1.58 |
| 2:35 | 2 h 35 min | 2.58 |
| 3:35 | 3 h 35 min | 3.58 |
| 4:35 | 4 h 35 min | 4.58 |
| 5:35 | 5 h 35 min | 5.58 |
| 6:35 | 6 h 35 min | 6.58 |
| 7:35 | 7 h 35 min | 7.58 |
| 8:35 | 8 h 35 min | 8.58 |
| 9:35 | 9 h 35 min | 9.58 |
| 10:35 | 10 h 35 min | 10.58 |
| 11:35 | 11 h 35 min | 11.58 |
| 12:35 | 12 h 35 min | 12.58 |
The whole hours are unchanged; only the minutes are converted. So 8 hours 35 minutes is 8.58 hours, never 8.35. The hours to decimal calculator converts any hh:mm value and back.
35 minutes under payroll rounding
| Convention | 35 minutes becomes | Decimal |
|---|---|---|
| Exact (hundredths) | 35 min | 0.58 |
| Tenths of an hour (6-minute steps) | 36 min | 0.6 |
| Quarter hours (15-minute steps, 7-minute rule) | 30 min | 0.50 |
Rounding to tenths or quarters is permitted under 29 CFR 785.48(b) when it averages out over time. 35 minutes is 5 minutes from the nearest quarter hour, so a quarter-hour clock drops that much on every punch that lands here. The time clock calculator applies each convention to real punches.
What 35 minutes is worth
| Hourly rate | 35 minutes |
|---|---|
| $15.00 | $8.75 |
| $20.00 | $11.67 |
| $25.00 | $14.58 |
| $30.00 | $17.50 |
| $50.00 | $29.17 |
Multiply the decimal by the rate: 0.58 × $20.00 = $11.67. At time and a half the same 35 minutes of overtime pay 0.58 × $30.00 = $17.50. Over a 5-day week, 35 unpaid minutes a day are 2.92 hours, and over a year of 250 workdays 145.8 hours.
Other values: 5 minutes, 10 minutes, 15 minutes, 20 minutes, 25 minutes, 30 minutes, 40 minutes, 45 minutes, 50 minutes, 55 minutes. The full minute-by-minute chart is on the minutes to decimal page.
Frequently asked questions
What is 35 minutes in decimal?
0.58 hours. Divide the minutes by 60: 35 ÷ 60 = 0.5833, which payroll rounds to two places. As a fraction it is 7/12 of an hour. Any whole number of hours plus 35 minutes is that number plus 0.58: 3 hours 35 minutes is 3.58 hours.
Is 35 minutes 0.35 of an hour?
No. 0.35 of an hour would be 21 minutes, because decimal hours are hundredths of 60 minutes, not minutes. 35 minutes is 0.58 of an hour. Writing minutes after a decimal point is the most common timesheet error and understates the time by 14 minutes.
How much is 35 minutes of overtime?
0.58 hours at the overtime rate. At a regular rate of $20.00 and time and a half, the overtime rate is $30.00 and 35 minutes pay $17.50. Overtime is measured in exact minutes unless the employer uses a lawful rounding rule, so 35 minutes over 40 hours in a workweek is 0.58 overtime hours.
Related calculators
- Minutes to DecimalMinutes become decimal hours when you divide by 60: 20 minutes is 0.33, 45 minutes is 0.75. Type a time above for the exact figure, or read it off the chart for every minute from 1 to 60.
- Hours to Decimal Calculator and Minutes to Decimal ChartEnter a time in hours and minutes to get decimal hours, or enter decimal hours to get hours and minutes. The chart below lists every minute from 1 to 60.
- Time Clock CalculatorEnter your clock-in and clock-out punches, with lunch as a second pair, and get hours worked in hours and minutes and in decimal, exact or rounded the way a time clock rounds. Add a rate for pay.
- Work Hours CalculatorEnter your start time, end time and unpaid breaks to get hours worked for a day, a week or a pay period in hh:mm and decimal hours. Overnight shifts, overtime and pay are handled automatically.